Advertisement
CUSTOMER NOTIFICATION:
In the Safety Recall Campaign letter that will be mailed on June 10, 2008 (see attachment),
customers are being advised to contact the Suzuki dealer where they purchased their affected
unit to schedule an appointment to have the ignition switch lead wire inspected. As some
customers may have moved to other communities since their motorcycle purchase, you may
also receive calls from customers who purchased their Suzuki elsewhere. Once you are
contacted by the owner of an affected unit, please arrange an appointment for a recall
inspection. Also, advise your customers that the Safety Recall Campaign service will be
performed at no cost to them for parts and labor.
IMPORTANT:
Successful completion of this safety recall campaign depends on your efforts. It is your
responsibility to repair any affected GSX1300RK8 within the VIN range at no cost to the
customer for recall service parts and labor. Incidental costs your customers may incur are
not normally covered. However, if you have a customer with special needs, contact your
Technical Service Manager (800/756-3251) to discuss possible solutions.
ORDERING PARTS FOR THE SAFETY RECALL CAMPAIGN:
You will be responsible for ordering the ignition switch kit for any customer's motorcycle
which had an incorrectly routed ignition switch lead wire. Order the switch kit using your
normal parts ordering methods. New, unsold units at your dealership will not require a
replacement ignition switch kit. Parts are currently available for this campaign.
Ignition Switch Set
1
2
3
4
SPECIAL TOOL AUTO-SHIPMENT
The special tool needed to disassemble the lock cylinder assembly will be auto-shipped
separately at no cost to your dealership during the week of June 9, 2008.
IGNITION SWITCH LEAD WIRE INSPECTION, REROUTING OR REPLACEMENT STEPS
New Unsold Unit (Dealer Inventory)
Inspect Routing (page 4)
Incorrect
Customer Unit (Sold) / Dealer Demo Unit
Inspect Routing (page 4)
Incorrect
PN 99103-11237
Description
Qty
Ignition Switch
Screws
Bolt, M8
Cap
Punch Mark VIN (page 8)
OK
Reroute (page 5)
Punch Mark VIN (page 8)
OK
Replace Ignition Switch
Dealer Cost-$85.03
Note
1
2
Mounted on Ignition Switch
2
Torx head, Pre-coated bolt
2
(page 6)
- 3/12-
Punch Mark VIN (page 8)
OK
Punch Mark VIN (page 8)
OK
Advertisement
