Table of Contents
Advertisement
Setup Procedure For Option
2nd Cassette Module
5
6
7
8
-1
9
Unplug the power code when installing each unit.
C
ATTENTION
Do not touch the gear area of the 2nd cassette
module.
Reinstall the rear cover and insert the hook then
plug the power code.
-2
9
Fix the 2nd cassette module under
the machine by turning the gears.
(Total 4 points)
If the 2nd cassette module is not
fixed securely, it may fall and hurt
you.
Remove the rear cover of the 2nd
cassette module.
# Pull out the hook.
$ Open the cover slightly, and
remove it.
Plug the harness of the 2nd
cassette module into the machine
connector.
# Reinstall the rear cover.
$ Insert the hook untill it locks.
Slide out the paper cassette and
remove the shipping materials.
(See steps 3, 4 on page 9)
Advertisement
Table of Contents
