Figure 5-18. Vor/Loc/Gs Arinc 429 Config Page - Garmin GPS 400W Installation Manual

400w series
Hide thumbs Also See for GPS 400W:
Table of Contents

Advertisement

5.3.15
V OR/LOC/GS ARINC 429 CONFIG Page (GNS 430W Only)
1 6 8 B
Select the VOR/LOC/GS ARINC 429 CONFIG Page (see
F igure 5-18). This page configures the VOR/ILS ARINC
4 3 7 H
429 output and input ports.
SPEED
Selection
Low
High
SDI
Selection
Common
VOR/ILS 1
VOR/ILS 2
DME MODE
Selection
Directed freq 1
Directed freq 2
400W Series Installation Manual
190-00356-02
Description
Standard low-speed ARINC 429 (nominally 12.5 kilobits per second)
High-speed ARINC 429 (nominally 100 kilobits per second)
Description
RX: Accepts all 429 inputs
TX: Generates all 429 outputs with SDI = 0.
Number 1 (Pilot) VOR/ILS Receiver
RX: Accepts 429 inputs with SDI = 0 or 1.
TX: Generates all 429 outputs with SDI = 1.
Number 2 (Copilot) VOR/ILS Receiver
RX: Accepts 429 inputs with SDI = 0 or 2.
TX: Generates all 429 outputs with SDI = 2.
Description
If the GNS 430W is connected to a multi-channel ARINC 429 DME,
channel 1 of that DME is tuned. "Directed freq 1" should be selected if
a single-channel ARINC 429 DME is tuned.
If the GNS 430W is connected to a multi-channel ARINC 429 DME,
channel 2 of that DME is tuned.
Figure 5-18. VOR/LOC/GS ARINC
429 CONFIG Page
Page 5-19
Rev. F

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gnc 420awGnc 420wGns 430awGns 430w

Table of Contents