Winding The Bobbin Thread, Regulating The Winder Tension - Pfaff 1245 Instruction Manual

Hide thumbs Also See for 1245:
Table of Contents

Advertisement

Setting up
9

Winding the bobbin thread, regulating the winder tension

.02
28
4
3
Fig. 9 -03
Place an empty bobbin 1 on winder spindle 1.
Thread up as shown in Fig. 9-03 and wind the thread a few ttimes clockwise around
bobbin 1. Engage the bobbin winder by pressing spindle 2 and lever 3 simultaneously
The bobbin is wound during sewing.
The tension of the thread wound onto bobbin 1 is set on knurled screw 4.
The bobbin winder will stop when suffi cient thread is wound onto bobbin 1.
If the thread is wound on unevenly:
Loosen nut 5.
Turn thread guide 6 as required.
Tighten nut 5 again.
Keystone Sewing Machine Company, Inc.
1
5
2
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

1246

Table of Contents