Tip: Quieting incoming calls and increasing your privacy. When you are in an area where
incoming Direct Connect calls may disturb others, or if you wish to increase the privacy of your calls,
please set your speakerphone to "off" and your ringer to "vibrate." When the speakerphone is off,
Direct Connect calls use the phone's earpiece and microphone, while still utilizing the DC Button.
You may also use an earbud or other hands-free device for increased convenience.
End a Direct Connect Call
There are two ways to disconnect a Direct Connect call.
Do nothing; the call will automatically end after several seconds if neither party presses the DC
n
Button.
– or –
Touch
.
Call Alerts
Call Alerts let you notify others that you want to communicate with them using Direct Connect. When
a user receives a Call Alert, the phone sounds a tone and displays your name or Direct Connect
number.
Send a Call Alert
Send a notification to start a Direct Connect call.
1. Press Home
>
Call alert.
– or –
Touch on the Contacts details screen, the Recent DC's details screen, the DC Call list screen,
or the Quick contact screen.
Note: When sending a Call Alert, make sure you select the Direct Connect number for the person
you are trying to reach.
2. Touch Add text and select a text, if you want to attach a preset text to the alert.
Important: Preset text messages with Call Alerts can only be sent to and from Direct Connect users
with Sprint phones. If you send a Call Alert with text to another Direct Connect subscriber without
this capability, the user will receive the Call Alert but will not receive the text message.
Note: There is no additional charge to send preset text messages with Call Alerts.
3. Press and release the DC Button. (The receiving phone emits an incoming tone and displays
an alert.)
Sprint Direct Connect
>
. Enter a Direct Connect number and press Menu
> Send
55