Kyocera Torque User Manual page 180

View Data Usage by Application
1. Press Home
> Menu
2. Confirm Mobile data is set to
3. Touch
next to Data usage cycle to change the period of time for which the chart will display
the data usage.
4. Touch either of the white lines on the chart to display the tabs. Drag the white tabs horizontally to
see the data usage of a specific period within the displayed cycle.
The usage amount will be displayed just below the chart.
l
Set Data Usage Limit
You can also set the limit for mobile data in case you don't have an unlimited data plan which cuts off
data at a specified threshold.
Warning: The usage displayed is measured by your phone. Your carrier's data usage accounting
may differ and the usage in excess of your data limit plan can result in charges. Data usage limit set
in this menu is not guaranteed to prevent additional charges.
1. Press Home
> Menu
2. Select the Set mobile data limit check box. Read the message and touch OK.
Note: Disabling the Set mobile data limit feature automatically disables MaxiMZR.
3. Drag the red tab vertically to set the limit you want.
– or –
Touch the red line, select the limit by flicking the value vertically and then touch Set.
When your data usage reaches the limit, mobile data will be turned off automatically.
l
4. Drag the orange tab vertically to set the level you receive a warning.
– or –
Touch the orange line, select the limit by flicking the value vertically and then touch Set.
When your data usage reaches the level set with the orange line, you will see the message.
l
Restrict Data Usage by Application
You can restrict the background data usage.
Settings
> System settings > Data usage.
.
> System settings > Data usage.
170