5.1.7
Front Cover, Media Module Cover*, and Harness Cover
(1) Remove the two screws.
(2) Take the front cover off the upper cover together with the media module cover.
(3) Press the latches on the harness cover inwards with a flat screwdriver, slide the harness cover
slightly to the rear, push down the two tabs to release them from the upper cover, and take the
harness cover out of the upper cover.
Harness cover
atch
ower cover
Upper cover
Tabs
atch
Front cover
5-14
*MFC3340CN only
Taptite, cup B
M3x8
Media module cover
Confidential