6.1.10 Media Module and Handset Mount (Side Cover)
The handset mount is for the MFC4820C, and the side cover for the MFC4420C.
(1) Remove the two screws (the inner one also secures the grounding wire) from the media module
and take the media module out of the machine while lightly pulling section X to the front.
(2) MFC4820C: Lift up the handset mount*.
MFC4420C: Lift up the side cover**.
Reassembling Notes
• The hook switch harness* is secured to the inside face of the handset mount with adhesive tape
as shown in "Routing F" in Section 6.1.15 "Routing of the Harnesses and Flat Cables."
6 -2 8
*For the MFC4820C
**For the MFC4420C