Set Country/Language (Function Code: 52) - Brother DCP-8110DN Service Manual

1.3.14 Set country/language (function code: 52)

<Function>
This function is user accessible, and is used to customize the EEPROM according to the
language, function settings, and worker switch settings.
Note:
• This function can be used only in the following nations: France, Belgium, Holland,
Norway, Sweden, Finland, Denmark, Austria, Czech, Hungary, Poland, General
(Others), Bulgaria, Romania, Slovakia, Spain, Portugal
<Operation Procedure>
Non touch panel models
(1) Press the [2] and [5] buttons in this
order in the initial state of maintenance
mode. "Set Country" is displayed on
LCD, and names of country in their
respective language follows.
(2) Press the [
country, and press the [OK] button. The
selected country is displayed in its
language for confirmation.
(3) Press "Yes" if the displayed country is
correct, and press the [OK] button. The
EEPROM is now customized, and the
machine returns to the ready state.
Note:
• The country name indicated on the LCD varies depending on the area (code input in
Function code 74) as shown in the table below.
Germany
Austria
Netherlands
Deutschland France
österreich België /
Belgique
Nederland
] or [ ] button to select
France
Belgium Oceania
Australia
New
Zealand
Touch panel models
(1) Press the [2] and [5] buttons in this
order in the initial state of maintenance
mode. "Set Country" is displayed on
LCD, and names of country in their
respective language follows.
(2) Press the name of country desirable for
the user. The selected country is
displayed in its language for
confirmation.
(3) Press "Yes" if the displayed country is
correct. The EEPROM is now
customized and the machine returns to
the ready state.
Pan-Nordic Iberia
Norge España österreich
Suerige Portugal Cheska republika T rkiye
Suomi Italia Magyaroraz g
Danmark Polska
Others
Rom nia
Slovensko
Others
5-24
South Africa
East Europe Turkey
Gulf
South Africa
Others
Confidential