Lt Connector (T1) - Brother DCP-8110DN Service Manual

9.38 LT connector (T1)

(1) Remove the three taptite bind B M4x12 screws, and remove the bottom frame L from the
main frame L ASSY. Then pull out the LT harness from the main frame L ASSY.
(2) Release the two hooks to remove the LT connector (T1) from the bottom frame L.
Note:
• When the bottom frame L is not used in the machine, remove the LT connector
(T1) from the main frame L ASSY.
Main frame L ASSY
Taptite bind B M4x12
Hook
LT harness
LT connector (T1)
Hook
Taptite bind B M4x12
Bottom frame L
Fig. 3-131
3-102
Confidential