Status Bar - Sony SR-R1000 Operation Manual

One-port display
a Port name
b SRMemory slot name
c File name
d Video format
Displays the video format according to port type.
For input ports
In: Displays the recording format.
For output ports
File: Displays the recording format of a file. When playing
a file recorded in a format that differs to the format set
for the port, the differing part is displayed in orange.
Out: Displays the video format for output via a port.
e Playback/recording mark
A mark is displayed during playback/recording.
f Remaining capacity display
Indicates the remaining capacity of the SRMemory card.
(This is displayed only for input ports.) You can select the
display format with [F2] (PANEL SETTING) - [F7]
(DISPLAY SETTING) - [F6] (RESIDUAL) in the SETUP
menu.
g Playback speed display bar
Indicates the playback speed and other information for
variable speed playback.
This is only displayed for output ports.
h Preview display area
Shows a preview of the selected file.
i Time data type
Indicates the time data type.
For details on time data type, see "Selecting the Time
Data" (page 29).
j LTC/VITC
Indicates the time code type (LTC or VITC).
k DF/NDF
Indicates the drop frame mode.
22
Display Screen
n Time code (Second area)
l F1/F2
Indicates the field number.
m Time code
Indicates the time code based on the setting of the TC
menu.
n Time code (Second area)
Indicates the time code when the ALT/[F5] (TC2 SEL)
buttons are set to anything other than Off in the TC menu.
This is only displayed in the one-port display screen.
B Status bar
b Button
operations
inhibited
c Eject operations inhibited
a Warning message
a Warning message
When a problem is detected by the unit, an icon and the
detected problem count is displayed. To obtain more
information on a detected problem, set ALT/[F9] (ERR
DLG) to "on" in the SETUP menu.
b Button operations inhibited
The operation inhibit icon is displayed when button
operations on the control panel are inhibited with the [F5]
(KEY INHI) button in the SETUP menu.
c Eject operations inhibited
Displays the relevant slot when inhibiting eject operations
has been set with [F6] (EJECT INHIBIT) in the SETUP
menu.
d Write-protected
Displays the number of the slot in which the write-
protected SRMemory card is inserted as set with the write-
protect switch or [F10] (LOCK) in the file list control
menu.
g Remote
control
f Network access
e Copy
d Write-protected