Control Panel - Dometic RM1350 Operating Instructions Manual

REFRIGERATOR OVERVIEW

CONTROL PANEL

1. ON/OFF button (main power)
Press the button to turn the refrigerator ON or OFF.
Button In = Unit Is ON
2. AUTO/GAS mode selector button
Press the button to turn the AUTO mode ON or OFF.
Button In = Auto Mode (Attempts Electric Mode First)
3. TEMP. SET button
The thermostat has 5 settings where 1 indicates the warmest and 5 the coldest temperature setting. Press the button once
to display the current setting. Continue to press repeatedly until the desired setting, e.g. 3, is shown in the LED display. This
value is shown for about 5 seconds and then the fresh food compartment temperature is displayed once again.
LED PANEL INDICATIONS
Display is on
Display is off
The AUTO indication
dot is lit.
The AUTO and LP
indication dots are lit.
The AUTO indication
dot is lit. LP indication dot
flashes slowly.
The LP indication
dot is lit.
Digits
e.g.
Message indications:
"60" is displayed.
"LP" is flashing (The message
alternates between "LP" and
the fresh food compartment
temperature.)
1 2 3
Button Out = Unit Is OFF
Button Out = Auto OFF (Attempts LP Gas Mode Only)
STATUS INFORMATION
Refrigerator on
Refrigerator off
AUTO mode and
AC operation
AUTO mode and
LP gas operation
Temporary gas lockout function. Only in AUTO mode.
It delays LP gas operation by 15 minutes when ignition
switch is turned OFF. This is for stopping at a refueling
station.
Manual LP gas operation mode.
Fresh food temperature.
Thermostat range setting indication (1 - 5). Temporary dur-
ing setting. The thermostat settings are stored automati-
cally after 5 seconds of inactivity.
Fresh food compartment temperature is above measure-
ment range.
LP gas operation lock out.
(Check LP gas.)
- 7 -