Control Panel - Dometic RM4873 Manual

2.

CONTROL PANEL

1
FIG. 10
3. START-UP INSTRUCTIONS
Before starting the refrigerator, check that all the manual gas
valves are in the ON position. DO NOT forget the manual
shutoff valve on the rear of the refrigerator. See FIG. 6.
This refrigerator is equipped with a control system, which
can automatically select the most suitable energy source
which is available, either AC, DC or LP gas operation. The
system can be set by the user to be fully automatic, or if
desired, LP gas only.
A. A 12 volt DC supply must be available for the electronic
3-WAY DISPLAY PANEL
A B C
3
2 4
J
D E
1
F F G G
LEGEND 3-WAY MODEL
1. Main Power Button ON/OFF
2. AES/AUTO Mode Selector Button
3. AC\GAS Mode Selector Button
4. GAS Mode Selector Button
5. TEMPERATURE Selector Button
A. AES/AUTO Mode Indicator Lamp
B. AC/GAS Mode Indicator Lamp
C. GAS Mode Indicator Lamp
D. AC Mode Indicator Lamp
E. GAS Mode Indicator Lamp
F. DC Mode Indicator Lamp
G. CHECK Indicator Lamp
(GAS Mode Only)
H. Temperature Indicator Lamps
J. Climate Control Switch
control to function. The refrigerator controls will work
down to 9.6 volts DC.
B. Press the main power ON/OFF button (1) to the DOWN
position.
C. Press the TEMPERATURE SELECTOR BUTTON (5)
until the lamp at the desired setting is illuminated.
9
2 3 4 5
5
H