Eeprom Customizing (Function Code 74) - Brother MFC-J6510DW Service Manual

5.1.4.25 EEPROM Customizing (Function code 74)

Function
This procedure customizes the EEPROM according to language, function settings, and
firmware switch settings.
NOTES: • If you replace the main PCB, be sure to carry out this procedure.
• Once this procedure is carried out, it is necessary to write the corresponding
language data, so be sure to write local programs, referring to
4.2 [ 4
Operating Procedure
(1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The "SELECT 74?" appears on the LCD.
(2) Press the Black Start (Mono Start) key, and the current customizing code appears.
(3) Enter the desired customizing code. (See the following pages.)
NOTE: If a wrong 4-digit code is entered, the machine will malfunction.
(4) Press the Black Start (Mono Start) key.
The machine saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop/Exit key or no keys are pressed for one minute in the above
procedure, the machine stops the procedure and returns to the initial stage of the
maintenance mode.
].
5-50
Chapter 4, Section
Confidential