Table of Contents
Advertisement
Light Settings
You can adjust the backlighting of the remote in two additional ways:
1. You can turn on/off the LCD and the hard button backlighting.
2. You can select the amount of time the lighting stays on after the last button
press from a range of values between 10 seconds and 90 seconds.
Sound Volume
Your KP-900 beeps whenever a button is pressed. However, you can
adjust the volume of the beep to one of four levels as shown here:
KP-900 O
WNERS
Page 10
M
ANUAL
Change whether the backlight-
ing is on or off by pressing this
button.
If you want the backlighting
always OFF, set it to OFF.
If you would like the backlight-
ing on, select ON.
The current timer setting is
displayed here in seconds.
Adjust the backlighting timer setting
with the LEFT and RIGHT keys as
shown in the previous pages.
The current Beep volume is dis-
played here as a "bar".
Adjust the volume of the beep by
tapping the LEFT and RIGHT arrow
keys as shown in the previous
pages.
OFF
SLIGHT BEEP
MODERATE BEEP
LOUDEST BEEP
Advertisement
Table of Contents
