Light Settings; Sound Volume - Universal Remote MXW-920i Owner's Manual

Light Settings

You can adjust the backlighting of the remote in two additional ways:
1. You can turn on/off the LCD and the hard button backlighting.
2. You can select the length of time the lighting stays on after the
last button press from a range of values between 10 seconds
and 90 seconds.

Sound Volume

Your MXW-920i beeps whenever a button is pressed. However, you
can adjust the volume of the beep to one of four levels as shown here.
MXW-920i O
WNER
Change whether the backlighting is on or
off by pressing this button.
If you want the backlighting always off,
set it to OFF.
If you would like the backlighting on,
select ON.
The current timer setting is displayed
here in seconds.
Adjust the backlighting timer setting with
the Left and Right keys as shown in the
previous pages.
The current Beep volume is displayed
here as a "bar."
Adjust the volume of the beep by
tapping the Left and Right arrow keys
as shown in the previous pages.
Page 6
' M
S ANUAL