Erasing Settings - Universal Remote Automator URC-200 Owner's Manual

Overview of Erasing
You can erase an individual button with a learned
command, a macro or a favorite channel. You can
erase an entire Device's learned command or macro
buttons. You can also erase ALL your learned com-
mands on all devices or all your macros or favorite
channels everywhere.
If you really want a fresh start, it is possible to reset
everything to the factory default condition.
Erasing Learned Buttons, Macros or Favs
Enter SETUP mode by pressing and holding both
1
MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise the
Automator will time out automatically.
2
Press a PAGE button to display page two of Setup.
3
Press the ERASE button.
Press either the LEARN, MACRO or FAV button.
4
The following screen appears:
ALL —
DEVICE—
KEY—
T h e A u t o m a t o r
Erases all of the specified (Learned, Macro or
FAV) buttons everywhere in the Automator.
Erases all Learned or Macro buttons in a Device
(this option doesn't appear for FAVS)
Erases one button only.
26