Descriptions And Functions - VocoPro UHF-8900 Owner's Manual

Descriptions and Functions

1
3
2
Front Panel
1. Antenna Connector - Connect the antennas to these connectors to receive the wireless signals from the microphones.
2. Main Power Switch - This switch turns the power on and off for the whole unit.
3. Power/Volume Knob - Turn clockwise, until it clicks, to toggle OFF/ON.
4. Module Display Window - This LCD screen displays information about this module. See the Module Display Window
descriptions and functions for more details .
5. Up/Set Button - Used to scroll up menu selections. When in IR Mode, it is used to confirm the desired frequency when
choosing manually .
6. Menu Button - Used to cycle through menu screens .
Press once (1x) to toggle into the Group (GR) Selection menu.
Press twice (2x) to toggle into the Automatic Scan.
Press three times (3x) to toggle into the Channel (CH) Selection menu.
Press four times (4x) to toggle into IR Mode.
Note: Module menus have a 4 second timeout period. If the menu button wasn't pressed within that time, the display will revert to
the frequency information screen.
7. Down Button - Used to scroll down menu selections.
8. IR Sensor - Used to sync the desired microphone to the desired module .
Note: IR communication range is approximately 7 inches.
4
8
- Turn clockwise past the click, to turn up the microphone volume for that channel..
5
7
6
10