Functions And Descriptions - VocoPro UDX Series Owner's Manual

Functions and Descriptions

UDX-OCTO Receiver (Front)
1. Power Switch: Turns the receiver ON or OFF.
2. IR Sensor: When syncing a transmitter to any channel on the receiver, hold the IR sensor on the transmitter up to
this IR sensor on the receiver to sync the frequency and pair the transmitter to a channel on the receiver.
3. Channel IR Button: Hold for 3 seconds to begin pairing for that channel. The IR sensor on the receiver will blink
red, indicating that it is ready to pair.
4. Channel Setup Knob/Button: When the channel is locked, turn to adjust the volume output for that channel.
Press and hold the button for a couple of seconds to unlock or lock the channel. When the channel is unlocked,
press the button to switch between Channel mode and Scan mode, and turn the knob to change the selected
frequency.
1 2 3
ANT-1
AF7
AF8
I R
S E T U P
CH-1
4
I R
S E T U P
CH-2 CH-3
AF7
AF8
I R
S E T U P
CH-4 CH-5
I R
C
/ 7