BMW R 1200 GS Adventure Rider's Manual page 63

Removing driver's seat
Make sure the ground is
level and firm and park the
motorcycle.
Removing passenger seat
( 60)
Turn key 1 in seat lock
counterclockwise while
pressing down on rear
region of driver's seat 3.
Lift rear of driver's seat 3
and remove.
Installing driver's seat
If too much pressure is
applied in the forward
direction, there is a danger
that the motorcycle will be
pushed off its stand.
Make sure that the motorcy-
cle is steady on its stand.
Insert driver's seat 3 into
mounts 4.
Lay driver's seat loosely on
motorcycle.
Press driver's seat light-
ly forward in rear area and
then firmly downward.
Driver's seat clicks audibly
into place.
Installing passenger seat
( 60)
Adjusting driver's seat
Make sure the ground is
level and firm and park the
motorcycle.
Removing driver's seat
( 61)
Turn driver's seat over.
Insert seat rods 1 and 2 into
the mounts 3.
4
61
z