BMW R 1200 GS Adventure Rider's Manual page 122

7
Bulb of rear turn indi-
cators
120
with OE White turn
indicators:
RY10W / 12 V / 10 W
z
Install bulb 2 by turning
clockwise in light housing.
Insert glass on motorcycle
in lamp housing and close.
Install screw 1.
Replacing additional
OE
headlight bulbs
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcy-
cle is steady on its stand.
Make sure the ground is
level and firm and park the
motorcycle.
Open connector 1.
Slacken screw 2.