JVC UX-M55 Service Manual page 11

Removing the technical door
Remove the cassette mechanism assembly.
Remove the cassette door cover.
1. Open the technical door, disengage the cassette
torsion spring hooked across the front of the front
cabinet assembly and the technical door in the
outward direction, and remove it from the claw g.
2. From the back side of the front cabinet assembly,
remove the two screws AA retaining the logic
deck bracket. (See Fig.23.)
3. While pushing the arm section h of the technical
door in the direction of the arrow, remove the shaft
section i of the technical door from the front
cabinet assembly. (See Fig.23.)
4. While pushing the arm section j of the technical
door in the direction of the arrow, remove the shaft
section k of the technical door from the front
cabinet assembly. (See Fig.23.)
5. Take out the technical door from the back side of
the front cabinet assembly.
[Caution] In the assembly, be sure to put the
cassette torsion spring around
the shaft section i before attaching
the technical door.
[Note] After assembly, apply a locking agent
to the screws AA.
(See Figs. 22 and 23.)
(See Fig.22.)
Arm section h
Shaft section i
Cassette torsion spring
AA
Front cabinet assembly
Technical door
Cassette torsion spring
Claw g
Disengage the cassette
torsion spring so that it
comes to the front of the
claw g.
Fig.22
Front cabinet assembly
Technical door
Arm section j
Shaft section k
Logic deck bracket
Fig.23
UX-M55
1-11