Table of Contents
Advertisement
UX-M55
<Front cabinet assembly section>
Remove the left and right side plates.
Remove the top cabinet.
Remove the front cabinet assembly.
Removing the key board (See Fig. 20.)
Remove the ten screws V retaining the key board.
Removing the cassette mechanism
assembly
Remove the two screws W and the two screws X
retaining the cassette mechanism assembly.
[Note] After assembly, apply a locking agent
to the screws W and X.
Removing the damp gear (See Fig. 20.)
Remove the screw Y retaining the damping gear
holder and take out the damp gear.
[Note] After assembly, apply a locking agent
to the screw Y.
Removing the latching cam assembly
Remove the two screws Z retaining the latching
cam assembly and remove the latching cam
assembly.
[Note] After assembly, apply a locking agent
to the screw Z.
Removing the cassette door cover
[Note] Use the following procedure to remove
only the cassette door cover.
This procedure does not require the
removal of exterior parts such as the
side panels.
1.
Open the cassette door.
2.
Slide the cassette door cover in the direction of
the arrow, and disengage the two claws e and the
two claws f on the left and right of the cassette
door cover from the technical door.
1-10
(See Fig.20.)
Damping gear holder
(See Fig.20.)
(See Fig.21.)
Technical door
Claw e
Claw f
Cassette door cover
Front cabinet assembly
V
Latching
cam assembly
Z
Y
Damp gear
X
Fig.20
Fig.21
Key board
V
W
Cassette
mechanism
assembly
X
Hide quick links:
Advertisement
Table of Contents
