Configuring The 480I Ct Ip Phone; Network; To Change Whether Dhcp Is Used; To Configure The Networks Settings - Aastra 480i CT User Manual

Configuring the 480i CT IP
phone
The Network and SIP options within
the 480i CT phone can be configured
from the phone or from the AASTRA
480i CT WEB CLIENT web interface.
Administrator level options are
password protected in both the phone
and the web interface. User level
options are password protected within
the web interface only.

Network

DHCP automatically sends the IP
address, Subnet Mask and Gateway
network (also DNS and TFTP Server)
information to the 480i CT phone
during initialization when the phone
is first powered up or reset. By
default, the DHCP setting is enabled.
Keep in mind that the network
settings cannot be changed when
DHCP is used.

To change whether DHCP is used:

From the 480i CT Phone
1. Press the w button to enter
the Options List
2. Select option 8. Network
3. Enter the password. The default (if
it was never changed) password is
22222
4. Press the Enter softkey
5. Select option 1. DHCP
6. Press the Change softkey to indicate
whether DHCP should be used or not.
From the web client
1. Click on the Network sub-category
under the ADMIN main category
2. Enter the administrator user name
and password
3. In the web page that has just
opened check the Use DHCP check
box provided, to use DHCP and
uncheck to indicate that you do not
want to use DHCP
4. Click on the Set Values button to
save the changes that you just made
If you are not using DHCP, you need
to enter the network information for
the phone manually.
To configure the networks settings:
From the 480i CT Phone
1. Press the w button to enter
the Options List
2. Select option 8. Network
3. Enter the password. The default (if
it was never changed) password is
22222
4. Select option 2. IP Address to
change the IP address
5. Select option 3. Subnet Mask to
change the subnet mask
6. Select option 4. Gateway to change
the gateway address
7. Select option 5. DNS to change the
DNS
Note: When an IP address has been
assigned to the phone, you have the
option to either continue configur-
ing the 480i CT through the button
on the phone or to start using the
Aastra 480i CT Web Client.
From the web client
1. Click on the Network sub-category
under the ADMIN main category
2. Enter the administrator user name
and password
3. In the web page that has just
opened enter the IP address of the
phone, the Subnet Mask and the
Gateway IP address in their
corresponding fields.
Contact your network administrator
to obtain information on the Subnet
Mask, Gateway and DNS addresses.

TFTP Server settings

The 480i CT Phone uses the TFTP to
update the phone's firmware and it's
configurations.
Model / User Guide 8