Vauxhall 2007 Vectra Operating & Safety Manual page 220

216 Wheels, tyres
Picture no: 17212t.tif
In vehicles with tyre pressure monitoring
system 3 there is an adapter in the valve
cap key. Screw adapter to valve before
attaching tyre pressure gauge, see
page 206.
Tyre pressure – see page 299 and the
adhesive foil on the inside of the tank flap.
Have adhesive foil replaced after changing
to different tyre size.
Do not reduce tyre pressure when the tyres
are warm. Otherwise the pressure may
drop below the permissible minimum when
the tyres cool down.
Ofrecido por www.electromanuales.com
Picture no: 17213t.tif
After having checked the tyre pressures,
tighten the valve caps using the valve cap
key.
Incorrect inflation pressures will impair
safety, vehicle handling, comfort and fuel
economy and will increase tyre wear.
If the pressure is too low, this can result in
considerable tyre warm-up and internal
damage, leading to tread separation and
even to tyre blow-out at high speeds.
Hidden tyre damage is not eliminated by
adjusting the inflation pressure.
9
Warning
Incorrect tyre pressure could lead to a flat
tyre.