Vauxhall 2007 Vectra Operating & Safety Manual page 129

1
B = Limited, only with seat occupancy
recognition and Vauxhall child
restraint system with transponders.
If the child restraint system is being
secured using a three-point seat
belt, move seat height adjustment 3
to uppermost position. Move front
passenger seat as far back as
possible and move front passenger
seat belt anchorage point to lowest
position.
2
B = Limited, only with seat occupancy
recognition and Vauxhall child
restraint system with transponders.
If the child restraint system is being
secured using a three-point seat
belt, move seat height adjustment 3
to uppermost position. Move front
passenger seat as far back as
possible so that vehicle safety belt
runs from anchorage point towards
the front.
Ofrecido por www.electromanuales.com
U = Can be used universally in
combination with a three-point seat
belt.
+ = Vehicle seat with ISOFIX mounting
available. When mounting with
ISOFIX, only ISOFIX child restraint
systems that have been approved
for the vehicle may be used. We
recommend your Vauxhall
Authorised Repairer.
X = No child restraint system permitted.
Safety systems
Note
z Children under 12 years or under 150 cm
tall should only travel in an appropriate
child safety seat.
z When transporting children, use the child
restraint systems suitable for the child's
weight.
z Ensure that the child restraint system has
been correctly fitted, see instructions
provided with child restraint system.
z The covers of the Vauxhall child restraint
system can be wiped clean.
z Do not stick anything on the child
restraint systems and do not cover them
with any other materials.
z Only allow the child to enter and exit on
the side of the vehicle facing away from
the road.
z A child restraint system which has been
subjected to stress in an accident must
be replaced.
125