Vauxhall 2007 Vectra Operating & Safety Manual page 170

166 Climate control
Parking heater
Start 1
Start 2
Start 3
On
Setting
Picture no: 17690j.tif
Switching on at a programmed time
Three programmed times can be stored for
switching on.
For safety reasons only one programmed
time for switching on can be active at any
one time. After the heating cycle has been
completed, the next required time for
switching on must be activated afresh.
To store a programmed time for activation,
select menu item Parking heater from the
manual settings menu.
After menu item Parking heater the
current status will be shown.
Ofrecido por www.electromanuales.com
Parking heater
Start 1
Start 2
Start 3
On
Setting
Picture no: 17691j.tif
To set a time, select menu item Setting.
Then select menu item Start 1, Start 2 or
Start 3 and set the desired time.
Setting
Start 1
Start 2
Start 3
Picture no: 17692j.tif
Select the required time for programmed
switching on.
When the system is activated, the control
indicator in the button AUTO will
illuminate.
The system switches itself off automatically
after a maximum of 60 minutes depending
on the values that have been set and the
interior temperature.
To cancel air conditioning, press the AUTO
button.
The menu for auxiliary heating can be
called up within 2 hours of switching the
ignition off, by pressing on the central
rotary knob, and settings entered.