Services Home; Touch Screen; Job Status - Xerox WorkCentre 5845 Quick Manual

®
Xerox WorkCentre™ 5845/5855/5865/5875/5890
How to Scan to Your Network
Control panel
1
2

Services Home

1

Job Status

2
Document feeder option
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents
feeder. Place the document face down onto the document glass and register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All (AC) button to cancel any previous screen programing selections.
Services
3. Press the Home button on the Control Panel.
Workfl ow Scanning
4. Select the
Workfl ow Scanning
5. If required, select the
6. Select a template type from the
7. Select the required template from the list
8. Select any options required.
9. Press the Start button on the Control Panel to scan the original.
©2012 Xerox Corporation. All rights reserved. XEROX®, XEROX and Design® are trademarks of Xerox Corporation in the U.S. and/or other countries.
IG120003
3

Touch Screen

3
Start
4
Document glass option
OR
button on the touch screen.
tab. This is usually the active tab when the Workfl ow Scanning service opens.
All Templates
dropdown menu.
5
4
Clear All
5
Stop
6
OR lift up the document
For more information
Please refer to: user guides - available
via
http://www.support.xerox.com
6