How To Load Paper - Xerox WorkCentre 5845 Quick Manual

®
Xerox WorkCentre™ 5845/5855/5865/5875/5890

How to Load Paper

Machine Overview
5
6
4
Trays 1 and 2
1. Open the tray.
2. Place the media in the tray. Media must
be positioned against the left side of the
tray. Paper must not be loaded above the
maximum fi ll line.
3. Make sure that the guides just touch the
paper.
4. Close the paper tray.
5. If the tray is set to Dedicated this is the end
of the loading process.
6. If the tray is set to Fully Adjustable the
paper tray settings will be displayed on the
screen. If the settings are correct select
Confi rm
the button. If the settings are not
correct change the settings as required.
Trays 3 and 4
1. Open the tray.
2. Place the media in the tray. Media must
be positioned against the left side of the
tray. Paper must not be loaded above the
maximum fi ll line.
3. Close the paper tray.
©2012 Xerox Corporation. All rights reserved. XEROX®, XEROX and Design® are trademarks of Xerox Corporation in the U.S. and/or other countries.
IG120003
7
1
2
3
Bypass Tray
1. Make sure the tray is in the down position.
For larger media, use the tray extension.
2. Place the media in the tray. Media must
be positioned against the left side of the
tray. Paper must not be loaded above the
maximum fi ll line.
3. Make sure that the paper guides just touch
the paper.
4. If the tray is set to Dedicated this is the end
of the loading process.
5. If the tray is set to Fully Adjustable the
paper tray settings will be displayed on the
screen. If the settings are correct select
the
correct change the settings as required.
Confi rm
button. If the settings are not
1 Tray 1
2 Tray 2
3 Tray 3
4 Tray 4
5 Bypass Tray
6 Tray 6 (optional)
7 Inserter Tray (optional)
Tray 6
1. Press the button to open the door.
2. Wait for the paper tray to lower.
3. Place the media in the tray. Media must
be positioned against the left side of the
tray. Paper must not be loaded above the
maximum fi ll line.
4. Close the door.
Tray 7 (Inserter)
1. Place the media in the correct orientation
for the job. The labels on the top of Tray 7
(Inserter) provide instructions for input and
output orientations.
2. Register the paper to the left edge of the
tray. Paper must not be loaded above the
maximum fi ll line.
3. Make sure that the guide just touches the
paper.
For more information
Please refer to: user guides - available
via
http://www.support.xerox.com