Input Channels; Added Gain Function - Yamaha CL5 Supplementary Manual

4.
Select an output port or input port.
NOTE
• There is a limit to the sum of INSERT 1 and INSERT 2 for each channel group, as shown in the
table below. You can select any output or input ports.
CH1-16 CH17-32 CH33-48
INSERT OUT 16 16 16
INSERT IN 16 16 16
• If you exceed the INSERT OUT or INSERT IN limitation, the
• If the limit is exceeded, invalid ports will be marked with a strike-out line.
• If the limit is exceeded, the following ports will take priority per channel group (listed in the table
above.)
1
INSERT 1 will take priority over INSERT 2.
2
Lower-number channel will take priority.
CH49-64
CH65-72 MIX1-24/
(CL5 and MATRIX1-8
(CL5 only) ST/MONO
CL3 only)
16 8 30
16 8 30
indicator will light up on the left.

Input channels

Added gain function

If GC (Gain Compensation) is enabled, you can link the digital gain to the analog gain operation.
While you are controlling the analog gain, the Gain Compensation function enables you to modify the
level on your own console without affecting the level of other consoles.
8
■ Linking the gains
8
1.
Press the GAIN knob in the GAIN/PATCH field in the OVERVIEW screen (or
SELECTED CHANNEL VIEW screen).
2.
Press the 1ch tab or 8ch tab in the GAIN/PATCH popup window.
AG➞DG LINK button
3.
Press the AG➞DG LINK button to turn the link on.
Using the AG→DG ALL ON button and AG→DG ALL OFF button enables you to turn the link
between the analog and digital gain for all input channels simultaneously.
You can also view the link status in the SELECTED CHANNEL VIEW screen.
4
AG➞DG ALL ON button/
AG➞DG ALL OFF button
: Link is on.
: Link is off.
Input channels
AG➞DG ALL ON button/
AG➞DG ALL OFF button
V2.0 Supplementary Manual