Quick Boot; Addon Rom Display Mode; Interrupt 19 Capture - Biostar BIPV10-IA Setup Manual

Quick Boot

Enabling this option will cause an abridged version of the Power On Self-Test
(POST) to execute after you power up the computer.
Options: Enabled (Default) / Disabled
Full Screen LOGO Disaply
This item allows you to enable/disable Full Screen LOGO Show function.
Options: Disabled (Default) / Enabled

AddOn ROM Display Mode

This item sets the display mode for option ROM.
Options: Force BIOS (Default) / Keep Current
Bootup Num-Lock
Selects the NumLock State after the system switched on.
Options: On (Default) / Off
PS/2 Mouse Support
This BIOS feature determines if the BIOS should reserve IRQ12 for the PS/2 mouse
or allow other devices to make use of this IRQ.
Options: Auto (Default) / Disabled / Enabled
Wait for 'F1' If Error
This BIOS feature controls the system's response when an error is detected during
the boot sequence.
Options: Enabled (Default) / Disabled
Hit 'DEL' Message Display
This BIOS feature allows you to control the display of the Hit "DEL" to enter Setup
message during memory initialization.
Options: Enabled (Default) / Disabled

Interrupt 19 Capture

Interrupt 19 is the software interrupt that handles the boot disk function. When set
to Enabled, this item allows the option ROMs to trap interrupt 19.
Options: Disabled (Default) / Enabled
BIPV10-IA
41