*Deduct these resistance values from the available unit ESP values listed in the respective blower performance table except for Horizontal Duct Connections
(Shaded
TABLE 11 - POWER EXHAUST PERFORMANCE
MOTOR
SPEED
CFM
HIGH*
5250
MEDIUM
4900
LOW
4400
*Factory Setting
Power Exhaust motor is a 3/4 HP , PSC type with sleeve bearings, a 48 frame and inherent protection.
TABLE 12 - BLOWER MOTOR AND DRIVE DATA
BLOWER
MODEL
DRIVE
RANGE
SIZE
(RPM)
HP FRAME
Stan-
850/1065
dard
15 TON
High
Speed
965/1190
Access
Stan-
870/1025
dard
20 TON
7.5
High
Speed
950/1120
Access
1All motors have a nominal speed of 1800 RPM, a 1.15 service factor and a solid base. They can operate to the limit of their service factor because they are located in the moving air, upstream
of any heating device.
2 Do NOT close this pulley below 1 turn open.
Unitary Products Group
EXTERNAL STATIC PRESSURE DROP
). Add these values due to less airflow resistance.