Replacing License Plate Lamp Bulbs; Replacing Backup Lamp Bulbs; Replacing High-Mount Brakelamp Bulbs - Lincoln Town Car 2005 Owner's Manual

8. Install the plastic retainer and carefully push the carpet back into
place.

Replacing license plate lamp bulbs

1. Make sure headlamp switch is in
OFF position, then remove two
screws, grommets and the license
plate lamp assembly from the trunk
lid.
2. Carefully pull the bulb from the
socket and push in the new bulb.
3. Install the lamp assembly on
trunk lid with two grommets,
ensuring the grommets are pushed
all the way in to the trunk lid and secure with two screws.

Replacing backup lamp bulbs

1. Make sure headlamp switch is in
OFF position, then open trunk and
remove bulb socket from the trunk
lid by turning counterclockwise.
2. Pull the bulb straight out of the
socket and push in the new bulb.
3. Install the bulb socket in trunk lid
by turning clockwise.

Replacing high-mount brakelamp bulbs

To change the high-mount brake
lamp assembly:
1. Make sure headlamp switch is in
OFF position, then pry the light
assembly away from its housing to
disengage it from the retaining clips.
2. Remove the light assembly from
the headliner.
3. Disconnect the light assembly wiring and replace the light assembly.
REVIEW COPY
2005 Town Car (tow), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)
Lights
99