Attaching Safety Seats With Latch Attachments - Lincoln Town Car 2005 Owner's Manual

Seating and Safety Restraints
Attaching safety seats with LATCH (Lower Anchors and Tethers for
Children) attachments
Some child safety seats have two rigid or webbing mounted attachments
that connect to two anchors at certain seating positions in your vehicle.
This type of child seat eliminates the need to use seat belts to attach the
child seat. For forward-facing child seats, the tether strap must also be
attached to the proper tether anchor. See Attaching safety seats with
tether straps in this chapter.
Your vehicle has LATCH anchors for child seat installation at the seating
positions marked with the child seat symbol.
The anchors on both sides of the
center of the rear seat are provided
for child seats at the outboard seats,
and are further apart than the pairs
of lower anchors for child seat
installation at other seats. DO NOT
install child seats with LATCH
attachments (rigid or mounted on
belt webbing) to the lower anchors
at the center rear seat. If you install a child seat at the center rear
position, use the vehicle belt and the top tether anchor.
Never attach two LATCH child safety seats to the same anchor.
In a crash, one anchor may not be strong enough to hold two
child safety seat attachments and may break, causing serious injury or
death.
Follow the child seat manufacturer's
instructions to properly install a
child seat with LATCH attachments.
Each pair of LATCH anchors are
located at the base of the seat back
inside the formed pocket in the
foam trim.
Attach LATCH lower attachments of the child seat only to the
anchors shown.
186
REVIEW COPY
2005 Town Car (tow), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)