Erasing Homelink Buttons; Reprogramming A Single Homelink Button - Lincoln Town Car 2005 Owner's Manual

Driver Controls

Erasing HomeLink buttons

To erase the three programmed buttons (individual buttons cannot be
erased):
• Press and hold the two outside
buttons. The message CLEARING
CHANNELS will appear on the
HomeLink display.
• After about 20 seconds, the
message CHANNELS CLEARED
will appear on the display. Do not
hold for longer that 30 seconds.
HomeLink is now in the train
(or learning) mode and can be
programmed at any time
beginning with step 2 in the
"Programming" section.

Reprogramming a single HomeLink button

To program a device to HomeLink using a HomeLink button previously
trained, follow these steps:
1. Press and hold the desired
HomeLink button. DO NOT
release the button. The display will
read CHANNEL "X" (1,2 or 3)
TRANSMIT
110
REVIEW COPY
2005 Town Car (tow), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)