Dhcp Relay Configuration - Planet XGS3-24042 User Manual

24-port gigabit with 4 optional 10g slots layer 3 managed stackable switch
Hide thumbs Also See for XGS3-24042:
Table of Contents

Advertisement

host <address> [<mask> |
<prefix-length> ]
no host
client-identifier <unique-identifier>
no client-identifier
client-name <name>
no client-name
3. Enable logging for address conflicts
Global Mode
ip dhcp conflict logging
no ip dhcp conflict logging
Admin Mode
clear ip dhcp conflict <address | all >

29.3 DHCP Relay Configuration

When the DHCP client and server are in different segments, DHCP relay is required to transfer DHCP packets.
Adding a DHCP relay makes it unnecessary to configure a DHCP server for each segment, one DHCP server
can provide the network configuration parameter for clients from multiple segments, which is not only
cost-effective but also management-effective.
DHCPDi scover ( Br oadcast )
DHCP Cl i ent
As shown in the above figure, the DHCP client and the DHCP server are in different networks, the DHCP
client performs the four DHCP steps as usual yet DHCP relay is added to the process.
1.
The client broadcasts a DHCPDISCOVER packet, and DHCP relay inserts its own IP address to the
relay agent field in the DHCPDISCOVER packet on receiving the packet, and forwards the packet to
the specified DHCP server (for DHCP frame format, please refer to RFC2131).
2.
On the receiving the DHCPDISCOVER packets forwarded by DHCP relay, the DHCP server sends
the DHCPOFFER packet via DHCP relay to the DHCP client.
3.
DHCP client chooses a DHCP server and broadcasts a DHCPREQUEST packet, DHCP relay
forwards the packet to the DHCP server after processing.
Command
DHCPO FFER( Uni cast )
DHCPREQ UEST( Br oadcast )
DHCPACK( Uni cast )
Figure 29-2 DHCP relay
Specify/delete the IP address to be
assigned to the specified client when
binding address manually.
Specify/delete the unique ID of the user
when binding address manually.
Configure/delete a client name when
binding address manually.
Explanation
Enable/disable logging for DHCP address to
detect address conflicts.
Delete a single address conflict record or all
conflict records.
DHCPDi scover
DHCPO FFER
DHCPREQ UEST
DHCPACK
DHCP Rel ay
29-69
DHCP Ser ver

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Xgs3-24242

Table of Contents