Blades
www.HunterFan.com
1.888.830.1326
Put the blade washers, found in
Lightly attach the blade irons to the
the
hardware bag, onto the blade
motor with screws found in
screws, found in the
hardware
the
hardware bag, then securely
bag. Then install the blade screws to
tighten after both screws are attached.
secure each blade to a blade iron.
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
12
M3521-01 • 05/14/14 • © Hunter Fan Company