Operation Instructions - Hunter ceiling fan Owner's Manual And Installation Manual

Light Kit (continued)
Install a bulb into each of
the sockets. When necessary,
replace with bulbs of the same
type and wattage.
Note: Globe style and number of
lights may vary.
Metal
Plate
Globe
Globe
Keeper
Finial
Cap
Finial
Press the globe and globe keeper
flush against the metal plate. Thread
the light pull chain through the hole
in the center of the finial cap and
thread the fan pull chain through the
hole in the side of the cap. Finally,
thread only the light pull chain
through the hole in the finial and
screw the finial onto the threaded rod.
M0099-01 • 05/06/14 • © Hunter Fan Company
Fan
Pull
Light
Pull Chain
Chain
Connect the appropriate pull
chain pendant to each of the
short chains coming from the
finial and finial cap.
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker affixed to the light socket(s)
15
www.HunterFan.com
See next page for remote

operation instructions.

may result in fire hazard or improper operation.
1.888.830.1326