Back to Contents Page
I/O Panel
Dell™ OptiPlex™ GX50 Systems
Removing the I/O Panel
Replacing the I/O Panel
Removing the I/O Panel
Small Form-Factor Desktop Computer
1. To access the screw that holds the I/O panel to the computer,
I/O Panel Removal—Small Form-Factor Computer
1 Internal speaker cable
2 Chassis intrusion switch cable
3 Control-panel cable
4 Front audio cable
5 Mounting screw
6 I/O cable
2. Disconnect the control-panel cable from the control-panel connector on the I/O panel. Disconnect the I/O cable from
the I/O panel.
3. Remove all cables that are connected to the I/O panel, such as the chassis intrusion switch and internal speaker cables.
remove the hard
drive.