Dell OptiPlex GX50 Systems Service Manual page 70

ALERT! Cover was previously removed.
10. Enter system setup and confirm that the system data area correctly identifies the type of installed microprocessor.
For instructions on using system setup, see the User's Guide.
11. While in system setup, reset the Chassis Intrusion option by pressing the left- or right-arrow key to select Reset and
then choosing Enabled, Enabled-Silent, or Disabled.
See the User's Guide for information on the chassis intrusion detector.
NOTE: If a setup password has been assigned by someone else, contact the network administrator for information on
resetting the chassis intrusion detector.
12. Run the Dell Diagnostics to verify that the new processor is operating correctly.
See the User's Guide for information on Dell Diagnostics.
Back to Contents Page