P
recautions
•
Do not charge the transcever and battery pack when they are wet.
•
Ensure that there are no metallc tems located between the
transcever and the battery pack.
•
Do not use optons not specfed by Kenwood.
•
If the de-cast chasss or other transcever part s damaged, do not
touch the damaged parts.
•
If a headset or headphone s connected to the transcever, reduce
the transcever volume. Pay attenton to the volume level when
turnng the squelch off.
•
Do not place the mcrophone cable around your neck whle near
machnery that may catch the cable.
•
Do not place the transcever on unstable surfaces.
•
Ensure that the end of the antenna does not touch your eyes.
•
When the transcever s used for transmsson for many hours, the
radator and chasss wll become hot. Do not touch these locatons
when replacng the battery pack.
•
Do not mmerse the transcever n water.
•
Always swtch the transcever power off before nstallng optonal
accessores.
•
The charger s the devce that dsconnects the unt from the AC
mans lne. The AC plug should be readly accessble.