Kenwood TK-2302 Instruction Manual page 13

i
nStAlling the
Speaker/ microphone
jack cover
i
nStAlling the
Speaker/ microphone
locking bracket
4
c
over over the
If you are not using a speaker/
microphone, install the cover over
the speaker/ microphone jacks using
the supplied 3 x 6 mm screw.
o S
ptionAl peAker
1 Insert the speaker/ microphone
2 Attach the locking bracket using
S / m
peAker
Note: To keep the transceiver water
resistant, you must cover the speaker/
microphone jacks with the supplied
cover.
/ m
icrophone
(or headset) plugs into the
speaker/ microphone jacks.
the supplied 3 x 6 mm screw.
Note: The transceiver is not fully
water resistant while using the
speaker/ microphone.
J
icrophone AckS
( h
or eAdSet
)