Canon imageFORMULA P-215 Service Manual page 83

a. Sensors and switches
The operation states of sensors and
switches are shown below.
The figure below shows that the "Tray
switch" is ON and the "Auto Start switch" is
OFF.
Figure 5-225
COPYRIGHT © CANON ELECTRONICS INC. 2011
Mark
Note: Because the registration sensor and
card sensor become the detection
state even if upper unit is in an opened
state, this mark turns on. The upper
unit is open, the registration sensor
detects the mark turns on.
CANON P-215 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Name/Description
Start button (Start switch)
When the start button is pressed,
the mark turns on.
Auto Start switch
Shows the ON/OFF state of the
switch.
Upper unit sensor
When the upper unit is open, the
mark turns on.
Registration sensor
When the registration sensor
detects paper, the mark turns on.
(See Note)
Document sensor
When the document sensor de-
tects paper, the mark turns on.
Tray switch (Power switch)
When the pickup tray is open,
the mark turns on.
Card sensor
When the card sensor detects
card, the mark turns on. (See
Note)
USB 3.0
When USB3.0 power is sup-
plied, the mark turns on.
Table 5-202
5-13