Canon imageFORMULA P-215 Service Manual page 81

2) Open the document guides fully extended,
then load a prepared registration adjust-
ment sheet as the first sheet and a pre-
pared shading sheet as the second. Insert
them properly not to cause skew.
Note: Do not set extra sheets.
Figure 5-218
3) On the service screen, select [All Adjust-
ment].
Figure 5-219
COPYRIGHT © CANON ELECTRONICS INC. 2011
4) The adjustment starts automatically. The
sheets are fed and the progress screen is
displayed.
5) Even after the shading sheet has been
ejected, the data may be processed in-
side the machine. The progress screen
disappears, and a warning screen is dis-
played. Do not turn OFF the machine or
perform any operations until the comple-
tion screen is displayed.
CANON P-215 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Figure 5-220
Figure 5-221
5-11