Clock Adjustment - Kenwood XD-951 Instruction Manual

Clock adjustment

56
This unit incorporates a clock function. Be sure to adjust
the correct time before using the timer function.
The time is displayed only while the power is off.
1
Activate the clock adjustment mode.
2
Select "TIME SET".
1
2 Press the SET key.
3
Enter the figure of hour.
1
To decrease
the figure
2 Press the SET key.
4
Enter the figure of minute.
1
To decrease
the figure
2 Press the ENTER key.
MULTI
CONTROL
SET
MULTI
CONTROL
To increase
the figure
SET
MULTI
CONTROL
To increase
the figure
ENTER
Adjust the clock before setting the timer.
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
÷ The time display starts to blink.
Example: Adjustment to 8:45
AM12ÔAM1ÔAM2...PM1ÔPM2...ÔRETURNÔAM12...
÷ The time of the day is represented in 12-hour AM/PM method.
÷ Press the SET key. The hour is entered and the minute display starts
to blink.
00Ô01Ô02...59ÔRETURNÔ00Ô01...
÷ If you made a mistake, select "RETURN" and press the ENTER key and
restart the entry.
÷ To adjust correct time, press the ENTER key at the same moment as
a time announcement.
÷ The "- - : - -" display appears after a power failure or when the power
cord has been unplugged from the AC outlet and plugged again. In such
a case, adjust the clock again.
XD-951/A900/A700 (En)
s E T C L O C K
A M 1 2 O 0
A M 8 0 0
A M 8 4 5