Recording Of An Entire Cd (Cd Record) - Kenwood XD-951 Instruction Manual

44
Recording of an entire CD
Perform the following operation while the CD player is in
stop mode to start recording at the same time as the start
of playback.
When the equalizer or SRS 3D is applied to the
sound, the sound with the applied effect can be re-
corded.
Recording preparations are required. •
1
Press the DUBBING key.
2
Select "CD RECORD".
1 Select.
3
Select the disc.
4
Start recording.
Press the ENTER Key.
(CD RECORD)
i
• • •
•
(Steps 1 to 3 ) (For the reverse mode, select " p " (two-way recording).)
2 Press SET.
MULTI
CONTROL
SET
MULTI
CONTROL
ENTER
When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected,
cancel it by pressing the STEREO key of the remote control unit.
CD RECORD
CD EDIT
CD PGM RECORD
TAPE DUBBING
(Only when the selected input is TAPE and tapes
are present in both decks A and B)
C D R E C O R D
D s I C
÷ Recording of CD starts at the same time as playback.
÷ At the end of tape, the music is not recorded on the leader tape portion.
If you do not want any music to be interrupted in the middle, refer to
"Recording" and start recording of side B with the interrupted track.
To end recording in the middle
÷ Both the cassette deck and CD player stop.
Convenient CD recording
XD-951/A900/A700 (En)
2
•
7