Inserting The Bobbin - Janome memory craft 2400 Instruction Book

z
x
B
c
q
8

• Inserting the Bobbin

z
Place the bobbin in the bobbin holder with the thread
running counterclockwise.
x
Guide the thread into notch A on the front side of the
bobbin holder.
Draw the thread to the left, sliding it between the
tension spring blade.
A
Continue to draw the thread lightly until the thread
slips into notch B.
Pull out about 15 cm (6") of thread.
c
Attach the hook cover plate.
Check the threading by referring to the chart shown on
the hook cover plate.
q
Bobbin thread