Cisco SN 5428 Hardware Installation page 52

Connecting Power
Figure 2-19 Power Set to Off
Power switch
Plug the power cord into the power receptacle located on the rear panel on the
Step 3
chassis. (See
Figure 2-20 Connecting a Power Cord to the SN 5428 Power Connector
Connect the other end of the power cord to the power source for the storage router.
Step 4
Cisco SN 5428 Storage Router Hardware Installation Guide
2-26
I
O
set to off
Figure 2-20.)
0
Chapter 2 Installing the SN 5428 Storage Router
OL-4796-01