Cisco SN 5428 Hardware Installation page 41

Chapter 2 Installing the SN 5428 Storage Router
Figure 2-8
When pulling the tab to remove the SFP module, be sure to pull in a straight
Caution
outward motion so you remove the SFP module from the port in a parallel
direction. Do not twist or pull the tab because you may disconnect it from the SFP
module.
To remove the SFP module from the port, pull the tab gently in a slightly
downward direction until it disengages from the port, and then pull the SFP
module out (see
Figure 2-9
OL-4796-01
Inserting a Mylar Tab SFP Module
Figure 2-9).
Removing a Mylar Tab SFP Module
Cisco SN 5428 Storage Router Hardware Installation Guide
Installing SFP Modules
2-15