Table of Contents
Advertisement
Chapter 1
Product Overview
Power Supply
Power Supply
The SN 5428 Storage Router has an internal power supply that monitors its
temperature and output voltages. The power supply automatically senses and
adjusts to either of these input voltages: 115 VAC/60 Hz or 230 VAC/50 Hz.
If conditions reach critical thresholds, the power supply will shut down to avoid
damage from excessive heat or electrical current. The power supply connects to
site power through a power cord and the power connector on the rear panel. (See
Figure
1-6.) The power supply is powered on with a rocker switch that is next to
the power connector. The switch is labeled
and
. Pressing
switches power on.
I
O
I
Pressing
O
switches power off.
Figure 1-6
Rear Panel, Power Connector
Power connector
Cisco SN 5428 Storage Router Hardware Installation Guide
1-9
OL-4796-01
Advertisement
Table of Contents
Troubleshooting
